Marine Hydraulics Power Steering Units For Boat M+S HKU Type 500cc BSPports

Part number	101
Description	OSPB 500 ON M+S HKU
Category	STEERING UNITS AND NON STANDARD PARTS
Function	OPEN CENTER
Manufacturer	HANJIU
Weight	7kgs

hydraulics and ships

We all know that a ship is a mobile power plant. It has enormous varieties of machineries for its propulsion, cargo operations, and shipboard safety as well as for maintaining the comfort standards of the crew. In all this wide variety of machinery, hydraulics plays a very vital role. The hydraulic technology is so precise and accurate that they are used in the main engine control and maneuvering systems, too. Let us now discuss on some important hydraulic applications on board ships and a short description of each.

Valves Operation:

Depending upon the type of ship, the cargo equipments and machineries vary. In the of an oil tanker, the main cargo system would include the cargo pumps and the cargo lines which have numerous valves in the lines. It is very difficult and time consuming to operate and perform the cargo operation manually. With the introduction of hydraulic circuits for valve operation, the whole cargo, ballast, and the bunkering operation can be done from just a mimic diagram which is in the control room.

Hydraulic steering fluid is clear, mostly odorless and slightly colored. It is specially formulated with viscosity stabilizers, anti-wear and anti-foaming agents, and corrosion inhibitors. It is the best oil to use in hydraulic steering systems.

If the hydraulic steering oil sample contains dirt or is otherwise contaminated, the entire system should be flushed and the hydraulic oil replaced.

Abrasive dirt is the biggest killer of hydraulic systems, and often comes from debris during the initial installation of the steering system. Dirt or “dust” can enter the system when hoses are cut and fittings installed. It is always best to flush out a steering system before the final hydraulic oil goes in, something to consider when making a repair.

Many marine professionals recommend that the system be flushed out and oil replaced every five years, making sure to bleed the system to remove air bubbles. Many service yards use portable purging systems that make this a quick and foolproof job that takes just minutes.

Shijiazhuang Hanjiu Technology Co.,ltd. is a professional manufacturer of industrial hydraulic components, located in China - Hebei City. Since 1995, Hanjiu focused on the development and production of full series of hydraulic components, orbit motors, steering orbitrols, directional control valves.

Our products include: GEROLER and GEROTOR motors, hydraulic steering units, directional control valves. More than 50 series, 2000 types. Personalized products and services to provide customers with a significant advantage. Due to the high quality of our products and reliable performance, they are widely used in mobile, industrial, fluid power, dynamic, agricultural, construction, marine, automation, transport, sanitary, etc.

Hanjiu Technology brings together the world's top professional talent and technology, has a highly qualified international personnel. Set from software development to hardware design, system testing, technical services are completed by professional and technical personnel. We have R & D base in Hebei, well-known institutions of higher learning and research institutions at home and abroad, work closely with national patent applications for 63, a number of the core technological achievements and technical indicators at the international advanced level.

To ensure the quality and stability of the machine, we use the most advanced production and testing equipment to check the quality and performance of our hydraulic motors and steering units and valves in each production step to ensure our hydraulic components perfect quality and stable performance.

We provide customers with affordable, high-quality hydraulic components. In order to achieve the advantages of Asia, the full benefit in terms of quality and cost, procurement of key machine from Germany, and the production and manufacturing in China. We have the best supply chain in China and parts manufacturers, and a solid record of quality and innovation, to prove that our 20+-year performance of the hydraulic components

Quality product performance and good reputation, our products are not only successful sales in China, and have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Spain, Poland, Russia, Belarus, South Korea, Turkey, Egypt, Brazil, Argentina, Chile, India, Australia, the United Arab Emirates, Saudi Arabia, USA, Mexico and other countries, the products are subject to a great welcome and praise.

Our goal is simple: to sell the best hydraulic motors, steering units, valves, components at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business is Perfect Hydraulics, to help others achieve their goals.

For more detailed information on our hydraulic components, please do not hesitate to contact us! We welcome your inquiries, and look forward to working with you.